The 7 Series E23 Forum

shock choice-feedback please - scott 2009-10-14 11:05:39 (121 views)
- Re: shock choice-feedback please - donstevens 2009-11-26 10:28:15 (16 views)
- I've had new shocks on three e23s - philipuk 2009-11-25 07:51:30 (44 views)
- Re: shock choice-feedback please - Hitmanx 2009-10-14 21:22:19 (81 views)
- The touring shocks are well just shocks The comforts - kff 2009-10-14 12:56:46 (109 views)

Idle quality - What to expect? - peeeot 2009-10-06 11:29:25 (177 views)
- Ready to clean injectors, finally. - peeeot 2009-11-12 18:32:35 (16 views)
- Update again. - peeeot 2009-10-24 19:13:42 (58 views)
  - Valve Cover & Oil Pan Bolts - Area52 2009-10-25 18:15:27 (83 views)
- These plugs should be fine, right? - peeeot 2009-10-22 11:26:53 (48 views)
- Re: Idle quality - What to expect? - elbiera 2009-10-21 17:50:01 (75 views)
- Intake job complete, negligable improvement. - peeeot 2009-10-12 14:24:29 (73 views)
  - need a few readings .... - johnhstein, 85-M6CSi, 85 745i 2009-10-12 15:37:24 (79 views)
    - I have some readings. - peeeot 2009-10-13 20:00:08 (85 views)
      - good stuff and helpful .... - johnhstein, 85-M6CSi, 85 745i 2009-10-14 12:43:51 (93 views)
        
        Thanks for all the quality information! - peeeot 2009-10-14 15:39:24 (105 views)
        
        all good questions - johnhstein, 85-M6CSi, 85 745i 2009-10-14 16:15:41 (61 views)
        
        Checked the HVAC. - peeeot 2009-10-15 12:59:51 (82 views)
        
        yup, that leak rate is negligible.... :-) (nt) - johnhstein, 85-M6CSi, 85 745i 2009-10-19 10:09:25 (56 views)
- I found my problem. - peeeot 2009-10-07 15:47:49 (150 views)
  - Anyone know where to buy the IACV to manifold hose? I can't seem to find it. (nt) - peeeot 2009-10-10 01:03:25 (83 views)
    - Re: Anyone know where to buy the IACV to manifold hose? I can't seem to find it. - kff 2009-10-10 10:27:56 (102 views)
  - Consider the easy quick fix... - johnhstein, 85-M6CSi, 85 745i 2009-10-08 09:06:09 (111 views)
  - Re: I found my problem. - limeyexpat 2009-10-07 21:19:12 (70 views)
  - Re: I found my problem. - Hitmanx 2009-10-07 16:51:27 (118 views)
- Re: Idle quality - What to expect? - Hitmanx 2009-10-07 12:30:46 (93 views)
- start with a few easy diagnostics - johnhstein, 85-M6CSi, 85 745i 2009-10-06 15:52:42 (158 views)
  - Re: start with a few easy diagnostics - peeeot 2009-10-06 20:17:00 (103 views)
    - I'd lay next a good bet - johnhstein, 85-M6CSi, 85 745i 2009-10-07 07:01:48 (96 views)
- Some of my observations (pic) - demet 2009-10-06 14:40:56 (214 views)
  - You run without your O2 sensor? - peeeot 2009-10-06 18:33:33 (95 views)
    - These cars .... - johnhstein, 85-M6CSi, 85 745i 2009-10-07 07:13:24 (115 views)
    - keep in mind that the US 733i only had a - sfdon 2009-10-06 20:09:21 (130 views)
    - Some answers... (url) - demet 2009-10-06 19:14:09 (126 views)
      - Re: Some answers... - limeyexpat 2009-10-07 00:38:25 (123 views)
      - I checked my switch out. - peeeot 2009-10-06 20:06:31 (82 views)
        
        Other possibilites... - Area52 2009-10-06 23:46:20 (77 views)
        
        Are leaking injectors a common problem? - peeeot 2009-10-07 00:12:27 (78 views)
        
        Re: Are leaking injectors a common problem? - Area52 2009-10-07 08:44:01 (95 views)
        
        Doh!... - Area52 2009-10-06 23:49:55 (84 views)

cold starts - zcarman 2009-09-12 18:22:11 (129 views)
- Re: cold starts - zcarman 2009-11-09 19:35:25 (18 views)
- Re: cold starts - matthewt 2009-09-12 23:24:05 (77 views)
  - Re: cold starts - zcarman 2009-09-13 09:47:07 (87 views)

adjusted AFM to run on new track, car runs too rich - ericbruckbauer 2009-10-06 08:37:45 (112 views)
- Re: adjusted AFM to run on new track, car runs too rich - Hitmanx 2009-10-07 16:43:21 (82 views)
- Check fuel pressure...the regulator may have failed... - Area52 2009-10-06 23:57:36 (115 views)
  - Re: Check fuel pressure...the regulator may have failed... - ericbruckbauer 2009-10-07 15:49:02 (107 views)
    - Regulator located front of fuel rail... - Area52 2009-10-07 18:53:11 (74 views)
      - Pictures, FINALLY! (pic) - ericbruckbauer 2009-11-01 16:06:25 (119 views)
        
        Re: Pictures, FINALLY! - limeyexpat 2009-11-07 09:35:08 (23 views)
        Anyone?? (nt) - ericbruckbauer 2009-11-07 08:30:47 (24 views)

E23 Borbet wheels - jdw928 2009-10-15 17:56:00 (118 views)
- Re: E23 Borbet wheels (pic) - cpseapeacp 2009-10-22 18:56:25 (170 views)
- Thye wheels should fit fine. I am not positive that the - kff 2009-10-22 18:00:17 (92 views)
- Your car is nearly identical to mine. I'm not a wheel and tirement fitment - DavidC 2009-10-22 14:35:33 (83 views)

high idle after driving and putting in park - 06impreza 2009-10-07 17:07:47 (116 views)
- Adjustable FPRs... a little info - johnhstein, 85-M6CSi, 85 745i 2009-10-09 11:56:35 (92 views)
  - Re: Adjustable FPRs... a little info - 06impreza 2009-10-09 16:41:55 (89 views)
    - Oh my..... - johnhstein, 85-M6CSi, 85 745i 2009-10-09 18:04:20 (68 views)
      - Re: Oh my..... - 06impreza 2009-10-09 21:48:22 (89 views)
        
        back to the basics... - johnhstein, 85-M6CSi, 85 745i 2009-10-10 10:02:59 (78 views)
        
        Re: back to the basics... - 06impreza 2009-10-10 13:17:04 (93 views)
        
        2,5 bar @ 14.5psi/bar ~= 37psi without the vacuum line connected. - demet 2009-10-10 17:14:55 (81 views)
        
        Bentley sez.... - johnhstein, 85-M6CSi, 85 745i 2009-10-13 19:18:56 (87 views)
        actually the pressure readout ... (url) - johnhstein, 85-M6CSi, 85 745i 2009-10-13 12:59:33 (82 views)
        
        I miss spoke.. 15ºC = 59F not 55ºF... sorry.... . (nt) - johnhstein, 85-M6CSi, 85 745i 2009-10-13 19:20:40 (54 views)
- Check the coolant temperature sender to the ECU. - kff 2009-10-08 22:00:34 (99 views)
  - Autohausaz has two which once should i get?? - 06impreza 2009-10-19 00:09:09 (68 views)
- never ever say 'shouldn't be a vacuum leak' (nt) - Area52 2009-10-08 19:34:04 (95 views)
  - lol... ya, not really a good idea with these cars huih (nt) - 06impreza 2009-10-08 21:07:09 (102 views)
- TPS idle signal not there or ICV bad? (pic) - demet 2009-10-07 20:29:46 (164 views)

1985 bmw 735i - lineman1959 2009-10-17 00:36:37 (115 views)
- Lineman...make sure you have good engine grounds - Vern 2009-10-18 02:27:14 (108 views)
  - Re: Lineman...make sure you have good engine grounds - Hitmanx 2009-10-18 23:59:37 (62 views)
- How is your fuel pressure? You can remove the cover of the - Vern 2009-10-17 01:11:32 (106 views)

WILL 235/60X16 ON E-38 RIMS FIT ON THE REAR OF AN E23 - cpseapeacp 2009-10-11 17:25:52 (100 views)
- YES THEY DO. RAISES THE REAR END UP A BIT. NO FITMENT PROBLEMS. NICE RIDE TOO. - cpseapeacp 2009-10-14 10:55:31 (77 views)
  - Re: YES THEY DO. RAISES THE REAR END UP A BIT. NO FITMENT PROBLEMS. NICE RIDE TOO. (pic) - cpseapeacp 2009-10-15 15:37:52 (147 views)
    - Re: YES THEY DO. RAISES THE REAR END UP A BIT. NO FITMENT PROBLEMS. NICE RIDE TOO. - matthewt 2009-10-16 22:54:26 (58 views)
      - hey do you have a picture? - cpseapeacp 2009-10-17 07:11:08 (55 views)
        
        Re: hey do you have a picture? (pic) - matthewt 2009-10-17 07:55:57 (162 views)
        
        Holy Cow! - samsonevickis 2009-10-17 19:21:55 (69 views)
        Re: hey do you have a picture? - cpseapeacp 2009-10-17 16:03:56 (59 views)
        
        Re: hey do you have a picture? - matthewt 2009-10-18 14:24:56 (68 views)
    - Those are the standard e38 basket weaves Style 5. (nt) - Roy In GA 2009-10-16 00:44:18 (77 views)

1982 733i ECM (motronic) (pic) - raf73698324 2009-10-13 20:01:01 (224 views)
- FIXED THE NO START! - raf73698324 2009-10-17 21:15:37 (70 views)
- FINALLY GETTING SPARK! - raf73698324 2009-10-17 17:13:05 (112 views)
  - You're welcome! Yayyyyy !!! 38psi is good for fuel delivery - Vern 2009-10-18 02:25:03 (81 views)
- Make sure speed and reference sensors are not switched around (nt) - Vern 2009-10-17 00:14:10 (74 views)
- Good pictures, Raf (url) - Vern 2009-10-17 00:10:49 (110 views)
  - Raf, one more file for the Idle Valve (url) - Vern 2009-10-17 15:11:08 (87 views)
    - relay 1 & relay 2 - raf73698324 2009-10-17 16:11:15 (80 views)
      - Relay 1 is the fuel pump relay at the fuse block - Vern 2009-10-17 18:14:15 (76 views)
    - relay 1 & relay 2 - raf73698324 2009-10-17 16:11:09 (91 views)
  - Re: Good pictures, Raf - raf73698324 2009-10-17 15:09:56 (78 views)
  - Vern, the legend said it was damaged and wouldn't show and the idle schematic - Roy In GA 2009-10-17 12:03:55 (73 views)
    - Roy, here is the link, again. Are you using a Mac? (url) - Vern 2009-10-17 15:15:36 (89 views)
      - I have a PC. It came through fine this time. (nt) - Roy In GA 2009-10-17 23:06:52 (73 views)
    - Thanks, Roy, I'll delete the cruise schematic and - Vern 2009-10-17 14:51:54 (82 views)
  - Re: Good pictures, Raf - raf73698324 2009-10-17 09:51:08 (88 views)
- What other models work the e23 - raf73698324 2009-10-16 10:02:35 (67 views)
  - Because it is an '82, you have to stay with the 001 or 002 ECU - Vern 2009-10-17 00:38:06 (63 views)
- Re: 1982 733i ECM (motronic) - limeyexpat 2009-10-13 20:47:07 (113 views)

Heavy Accelerator Pedal - peeeot 2009-10-14 15:30:56 (82 views)
- try a new cable. Nice light throttle action with new one. (nt) - phathome 2009-10-17 13:30:27 (75 views)
- Is there a spring on the pedal? - demet 2009-10-15 14:35:45 (75 views)
- i enjoy the heavy pedal - goms187 2009-10-14 16:42:44 (91 views)
  - So it's normal then? - peeeot 2009-10-15 12:53:05 (59 views)
  - I agree - samsonevickis 2009-10-14 19:43:19 (87 views)

wheels question - raf73698324 2009-10-15 10:14:30 (120 views)
- e39 wheels need rings I think to fit. (nt) - Roy In GA 2009-10-16 00:50:23 (105 views)
  - Re: e39 wheels need rings I think to fit. - raf73698324 2009-10-16 09:33:30 (75 views)
  - Re: e39 wheels need rings I think to fit. - raf73698324 2009-10-16 09:33:27 (71 views)
    - The hub on BMWs is 72.x except on the E39 - kff 2009-10-16 11:12:34 (70 views)
      - Re: The hub on BMWs is 72.x except on the E39 - raf73698324 2009-10-16 16:42:35 (73 views)
        
        Re: The hub on BMWs is 72.x except on the E39 - kff 2009-10-16 23:03:13 (103 views)

4HP22EH Problems - cambridge 2009-10-13 19:31:31 (99 views)
- Re: 4HP22EH Problems - matthewt 2009-10-16 22:50:11 (67 views)
- Re: 4HP22EH Problems - Hitmanx 2009-10-15 20:36:40 (82 views)
- Re: 4HP22EH Problems - Area52 2009-10-13 19:59:25 (110 views)

Are there any aftermarket exhaust systems that are as quiet as the factory units - Roy In GA 2009-10-12 18:51:25 (118 views)
- Not that I have heard.... - sfdon 2009-10-13 23:12:19 (70 views)
  - Thanks Don, do you know which is the factory brand? (nt) - Roy In GA 2009-10-15 00:04:32 (54 views)
    - Boysen is the factory brand. (nt) - Vern 2009-10-15 20:05:25 (69 views)
    - Re: Thanks Don, do you know which is the factory brand? - Hitmanx 2009-10-15 17:54:54 (68 views)

BavAuto's Floor Mats - peeeot 2009-10-15 10:02:40 (73 views)
- Re: BavAuto's Floor Mats - goms187 2009-10-15 11:03:16 (98 views)
  - Would you recommend them? - peeeot 2009-10-15 12:52:11 (72 views)

Does anyone know... - goms187 2009-10-12 23:49:59 (95 views)
- Throttle position sensor tells the computer to switch - kff 2009-10-13 10:31:51 (79 views)
  - ok well here is my problem - goms187 2009-10-13 11:53:49 (82 views)
    - Which AFM & ECU are you using? - Area52 2009-10-14 21:33:01 (94 views)
      - Re: Which AFM & ECU are you using? - goms187 2009-10-14 22:35:00 (64 views)
        
        Everything you wanted to know about the b35 conversion. (url) - demet 2009-10-15 11:19:40 (104 views)
        
        great link! Thanks (nt) - goms187 2009-10-15 12:20:14 (58 views)
        
        Re: Which AFM & ECU are you using? - Area52 2009-10-15 08:31:06 (73 views)
  - Re: Throttle position sensor tells the computer to switch - rick540 2009-10-13 11:06:22 (81 views)
    - You got it backwards...... - sfdon 2009-10-13 23:08:08 (88 views)
    - My experience... - Area52 2009-10-13 18:35:04 (62 views)
      - My o2 sensor is not connected. So it should always be open loop (nt) - goms187 2009-10-13 23:31:23 (87 views)
        
        Correct and... - Area52 2009-10-14 21:08:02 (76 views)

Stuck motor in the '84... - Hitmanx 2009-10-14 03:40:31 (96 views)
- Re: Stuck motor in the '84... - Hitmanx 2009-10-14 16:46:37 (87 views)
- I would squirt a good amount of oil in the cylinders and leave it for a day. (nt) - samspade 2009-10-14 06:05:30 (110 views)

I won the zender trunk spoiler on eBay - 06impreza 2009-10-12 15:03:58 (89 views)
- Does anyone have pics of the spoiler color matched?? I wanna get it done.. - 06impreza 2009-10-13 21:23:02 (62 views)

muffler - goms187 2009-09-20 20:14:30 (181 views)
- Heard the car in person on Friday... It sounds nice! (nt) - 06impreza 2009-10-11 17:36:26 (69 views)
- Muffler recordings.... - johnhstein, 85-M6CSi, 85 745i 2009-10-08 17:36:20 (80 views)
  - Re: Muffler recordings.... - goms187 2009-10-13 00:17:37 (65 views)
    - No hurry on the recordings... more - johnhstein, 85-M6CSi, 85 745i 2009-10-13 07:40:30 (59 views)
- New system (pic) - goms187 2009-10-06 09:57:55 (229 views)
  - Re: New system - donstevens 2009-10-13 09:21:03 (49 views)
  - That is very pretty, compared to what I had on the 745. - demet 2009-10-06 19:22:33 (66 views)
    - yeah... - goms187 2009-10-06 20:57:43 (73 views)
      - direct link for the mp3 download (url) - goms187 2009-10-07 20:42:58 (96 views)
        
        Not bad, but now I demand video to go with the sound. - demet 2009-10-09 20:06:50 (65 views)
        
        Re: Not bad, but now I demand video to go with the sound. - Hitmanx 2009-10-11 18:03:10 (44 views)
      - sound clips (url) - goms187 2009-10-06 21:27:50 (98 views)
        
        Re: sound clips - Hitmanx 2009-10-06 22:47:47 (83 views)
  - Re: New system - Hitmanx 2009-10-06 17:30:19 (76 views)
  - What exactly is it? magnaflow? exhaust size? (nt) - ((((BIGANT)))) 2009-10-06 12:38:23 (52 views)
    - B&B cat back system (nt) - goms187 2009-10-06 13:23:58 (61 views)
  - Can't wait to hear it.. Lemme know when it's good to go! (nt) - 06impreza 2009-10-06 11:31:13 (62 views)
- Here's what I'm doing... - ericcue 2009-09-24 20:33:15 (151 views)
  - Re: Here's what I'm doing... - goms187 2009-09-25 13:27:03 (104 views)
    - Re: Here's what I'm doing... - ericcue 2009-09-26 02:13:45 (88 views)
      - Re: Here's what I'm doing... - goms187 2009-09-28 10:34:11 (83 views)
        
        actually - goms187 2009-09-28 11:55:27 (102 views)
        
        Re: actually - ericcue 2009-09-29 02:06:44 (84 views)
        
        something more like this (url) - goms187 2009-09-29 10:40:49 (106 views)
        
        Re: something more like this - ericcue 2009-09-30 01:38:48 (82 views)
        
        they don't make anything as long in the smaller size.... (nt) - goms187 2009-09-30 10:05:00 (68 views)
        
        ok this one is 18' and smaller dia. (url) - goms187 2009-09-30 16:59:02 (97 views)
        ok this one is 18' and smaller dia. (url) - goms187 2009-09-30 16:59:00 (90 views)
- Just get a magnaflow and be done with it. (pic) - ejonesie22 2009-09-23 16:11:46 (238 views)
- I have a friend who has a Magnaflow in his 745i - Vern 2009-09-22 15:37:17 (114 views)
  - i know its asking alot but would it be possible - goms187 2009-09-22 21:57:34 (99 views)
    - I should see him in the next week, or so (nt) - Vern 2009-09-23 15:06:01 (109 views)
- Re: muffler - Hitmanx 2009-09-21 01:37:29 (139 views)
  - I just gave in and bought a b&b this morning (nt) - goms187 2009-10-05 12:01:07 (61 views)
  - sorry should of specified, looking for performance muffler - goms187 2009-09-21 12:31:25 (88 views)
    - Re: sorry should of specified, looking for performance muffler - Hitmanx 2009-09-21 18:44:53 (79 views)
      - yes much more sound, haha - goms187 2009-09-21 20:48:43 (83 views)
        
        Re: yes much more sound, haha - Hitmanx 2009-09-22 00:33:56 (76 views)
        
        Re: yes much more sound, haha - 944s 2009-09-22 22:25:17 (108 views)
        
        Re: yes much more sound, haha (pic) (url) - Hitmanx 2009-09-24 01:29:30 (198 views)
        
        Re: just got mine done last week and - bodoke 2009-10-03 20:52:48 (88 views)
        
        Any chance your looking to replace it with something - goms187 2009-09-22 11:30:36 (97 views)
        
        Re: Any chance your looking to replace it with something - Hitmanx 2009-09-24 01:42:16 (134 views)

need help with ignition coil - raf73698324 2009-10-12 19:53:07 (103 views)
- what year, model car? - goms187 2009-10-12 23:53:50 (64 views)
  - Re: what year, model car? - raf73698324 2009-10-13 06:36:40 (73 views)
- Re: need help with ignition coil - raf73698324 2009-10-12 20:01:00 (101 views)
  - Battery - clemsoncpa 2009-10-12 23:19:23 (84 views)

L7 Trunk Weatherstripping / Gaskets - cfik509cla 2009-10-12 12:49:57 (101 views)
- a good parts look up link .... - johnhstein, 85-M6CSi, 85 745i 2009-10-12 15:42:47 (91 views)
- 51 71 1 847 098 $71.56 Found It - (nt) - cfik509cla 2009-10-12 13:09:55 (97 views)

Quick o-ring question. - peeeot 2009-10-12 09:16:31 (86 views)
- If you can't find an o-ring, then - johnhstein, 85-M6CSi, 85 745i 2009-10-12 15:40:34 (84 views)

Anyone know how to start a 'no starter'? - 86-735i - e23chris 2009-10-10 15:27:01 (118 views)
- I assume you have spark? (nt) - Roy In GA 2009-10-11 16:34:45 (83 views)
  - Re: I assume you have spark? - e23chris 2009-10-12 05:14:38 (88 views)
- Also check speed and reference sensors. (nt) - ejonesie22 2009-10-11 09:55:45 (67 views)
  - Re: Also check speed and reference sensors. - e23chris 2009-10-11 16:27:38 (74 views)
- This link is to my list of manuals for the car (url) - kff 2009-10-11 00:12:35 (132 views)
  - Re: This link is to my list of manuals for the car - e23chris 2009-10-11 04:55:21 (89 views)
- Re: Anyone know how to start a 'no starter'? - 86-735i - Hitmanx 2009-10-10 18:28:31 (90 views)
  - Re: Anyone know how to start a 'no starter'? - 86-735i - e23chris 2009-10-10 22:05:08 (67 views)

Why didn't anyone create a manual for the e23? - e23chris 2009-10-10 15:03:21 (120 views)
- There are THREE 7 series manual formats - sfdon 2009-10-11 13:10:14 (97 views)
  - Re: There are THREE 7 series manual formats - e23chris 2009-10-11 16:24:17 (89 views)
    - I posted the euro and us 7er engine manual - sfdon 2009-10-11 17:01:09 (83 views)
      - Re: I posted the euro and us 7er engine manual - e23chris 2009-10-12 05:12:12 (109 views)
- Online manual uploaded here ... (url) - samspade 2009-10-11 04:30:41 (136 views)
  - Re: Online manual uploaded here ... - e23chris 2009-10-11 04:46:07 (106 views)
- So why never an englisch version? (nt) - e23chris 2009-10-10 21:44:11 (102 views)
- Online manual... (url) - demet 2009-10-10 17:26:47 (114 views)
  - Re: Online manual... - e23chris 2009-10-10 21:34:51 (72 views)
- Re: Why didn't anyone create a manual for the e23? - nerdorama 2009-10-10 16:56:38 (75 views)
  - Re: Why didn't anyone create a manual for the e23? - e23chris 2009-10-10 20:53:36 (92 views)
- Nope - samsonevickis 2009-10-10 16:44:03 (98 views)
  - Re: Nope - e23chris 2009-10-10 21:39:17 (91 views)

For all you guys with parts cars... - samsonevickis 2009-09-18 21:16:19 (124 views)
- Re: For all you guys with parts cars... - derrith 2009-10-12 02:01:44 (39 views)
- Can you get on realoem and show part so there's no chance of mistake? - dr750 2009-09-28 18:15:58 (76 views)
  - Input these part numbers - samsonevickis 2009-09-28 20:18:48 (83 views)

Connection piece in the fuel preparation system - ssf1342 2009-10-11 20:44:00 (90 views)
- I second removing it. (nt) - demet 2009-10-11 22:47:50 (97 views)
- Re: Connection piece in the fuel preparation system - Hitmanx 2009-10-11 22:20:50 (81 views)

Picture of a 728i on RF (url) - Roy In GA 2009-10-08 19:08:47 (157 views)
- Not Hennarot? What is Kastanien? Sure is beautiful :-) (nt) - Vern 2009-10-09 19:26:35 (63 views)
  - Chestnut Red, very nice color. New to me. (nt) - Roy In GA 2009-10-11 16:26:34 (75 views)
  - I like the color also. A friend recently bought a Byzanz E36 - kff 2009-10-09 19:55:49 (69 views)
    - Here are a couple examples (url) - kff 2009-10-09 19:59:25 (90 views)
- Re: Picture of a 728i on RF - oldsurge 2009-10-09 11:04:58 (92 views)
  - Kastanienrot nice. (nt) - kff 2009-10-09 14:05:50 (61 views)

You guys were right! (pic) - mofinco 2009-10-03 17:32:47 (153 views)
- Gear replacement was easy - mofinco 2009-10-11 15:28:12 (64 views)
- Re: You guys were right! - Hitmanx 2009-10-04 15:34:28 (78 views)
  - It's a problem with the plasticiser chemicals used in the older plastics which - Roy In GA 2009-10-04 22:41:04 (78 views)
    - Agreed - mofinco 2009-10-11 15:25:06 (78 views)
    - Re: It's a problem with the plasticiser chemicals used in the older plastics which - Hitmanx 2009-10-05 10:32:23 (59 views)
- I've been told, that the original grease - clemsoncpa 2009-10-03 18:10:16 (83 views)
  - And don't reset trip meter while moving (nt) - Area52 2009-10-04 06:47:46 (64 views)
    - Can't quite make sense of that... ;-) - mofinco 2009-10-04 12:27:04 (89 views)
      - Agree... - Area52 2009-10-04 12:35:22 (107 views)
        
        Mine reached... (pic) - demet 2009-10-04 14:36:35 (125 views)

Brake bomb victory - nerdorama 2009-10-10 17:01:56 (105 views)
- Next time use the chisle trick and you won't even have to remove anything... - ejonesie22 2009-10-11 09:52:55 (82 views)
  - Re: Next time use the chisle trick and you won't even have to remove anything... - nerdorama 2009-10-11 11:03:42 (77 views)
    - Re: Next time use the chisle trick and you won't even have to remove anything... - ejonesie22 2009-10-11 13:03:57 (105 views)

Heads up, selling my 745... - ejonesie22 2009-10-11 10:08:56 (104 views)

If these cars were worth anywhere near the E28 or E30 OR E21 - samsonevickis 2009-10-02 01:48:16 (109 views)
- These cars are worth what you want them to be to you. - ejonesie22 2009-10-11 10:02:18 (80 views)
- There's a lack of enthusiasm about them... - ericcue 2009-10-03 15:18:30 (118 views)
  - I would refute this accusation... - Vern 2009-10-05 17:46:57 (79 views)
  - Re: There's a lack of enthusiasm about them... - limeyexpat 2009-10-03 18:22:39 (106 views)
- Definitely worth more than E21 and E28 and E30 - Vern 2009-10-03 12:06:13 (105 views)
- Mine is worth money, just can't seem to get that - kff 2009-10-02 03:01:44 (127 views)

Help Please! 1985/5 speed - scott 2009-10-08 12:48:58 (85 views)
- Thank You All--Problem fixed and---> - scott 2009-10-10 14:42:12 (76 views)
- Hey Guys!! - scott 2009-10-09 22:25:42 (70 views)
  - The connector to the actuator is under the dash, in the left corner. - demet 2009-10-09 23:22:20 (100 views)
    - Will check tomorrow Great thanks. Will report on it (nt) - scott 2009-10-09 23:43:28 (56 views)
- Current could be backflowing from cruise control ... - demet 2009-10-09 20:25:58 (68 views)
- Re: Help Please! 1985/5 speed - limeyexpat 2009-10-09 09:47:00 (86 views)
  - Pull trunk carpet...toward driver side... - Area52 2009-10-09 19:48:25 (75 views)
- Did you correctly - clemsoncpa 2009-10-08 20:50:44 (98 views)
  - ?????? - scott 2009-10-08 21:41:12 (89 views)
    - Thats why I said I think - clemsoncpa 2009-10-08 23:40:03 (87 views)
      - Connector is shorted ... - samspade 2009-10-09 02:04:46 (98 views)
        
        Ooops ... (pic) - samspade 2009-10-09 02:10:00 (136 views)
- Not on with car off (nt) - scott 2009-10-08 12:49:39 (66 views)

There's an '86 735i for $500 in the For Sale forum... (url) - DavidC 2009-10-07 21:54:59 (102 views)
- Re: There's an '86 735i for $500 in the For Sale forum... - oldsurge 2009-10-10 13:00:53 (79 views)
  - Re: There's an '86 735i for $500 in the For Sale forum... - Hitmanx 2009-10-10 14:34:39 (53 views)

Intake Job and Qs (naturally (pic) - peeeot 2009-10-09 11:44:24 (193 views)
- Re: Intake Job and Qs (naturally (url) - Area52 2009-10-09 19:32:39 (128 views)
- Re: Intake Job and Qs (naturally - limeyexpat 2009-10-09 12:48:48 (94 views)
  - Vacuum Diagram/Routing - peeeot 2009-10-09 13:25:50 (90 views)
    - The vacuum line on my purge valve goes to a nipple on the crankcase breather tub (pic) - demet 2009-10-09 18:10:16 (170 views)
      - Fantastic! This is what I needed to know! (pic) - peeeot 2009-10-10 01:02:24 (120 views)
        
        Here's the vacuum routing for my e23 (85 735, Motronic 059)... (pic) - demet 2009-10-10 12:50:32 (154 views)
        Re: Fantastic! This is what I needed to know! - limeyexpat 2009-10-10 10:42:52 (85 views)
      - Re: The vacuum line on my purge valve goes to a nipple on the crankcase breather tub - limeyexpat 2009-10-09 19:12:28 (85 views)
        
        I'll take a couple of pics of my 23 and post them. (nt) - demet 2009-10-09 20:13:12 (106 views)
- edit. - peeeot 2009-10-09 12:00:11 (74 views)

Diaphragm repair - limeyexpat 2009-10-10 11:59:57 (101 views)

Sunroof Drains? - Hitmanx 2009-10-09 16:26:05 (101 views)
- Perhaps more likely the heater box firewall seal. - peeeot 2009-10-10 00:49:37 (123 views)
- Re: Sunroof Drains? - Area52 2009-10-09 19:40:52 (81 views)
  - Re: Sunroof Drains? - Hitmanx 2009-10-09 20:02:46 (129 views)
    - Seals don't really stop the water ... - demet 2009-10-09 20:11:31 (87 views)
      - Re: Seals don't really stop the water ... - Hitmanx 2009-10-09 21:02:53 (75 views)
        
        Re: Seals don't really stop the water ... - Area52 2009-10-09 22:18:24 (101 views)
        
        The last time I checked an e23 ... - demet 2009-10-09 23:34:10 (86 views)

Absolutely buffaloed on locating this part (body electric) - seaside 2009-10-03 20:01:17 (113 views)
- I'll see if I can grab one next time I'm at yard.. Which door? (nt) - 06impreza 2009-10-06 01:32:52 (91 views)
  - Re: I'll see if I can grab one next time I'm at yard.. Which door? - seaside 2009-10-07 18:31:56 (92 views)
  - I also have a bunch of doors. Post a pic of the part. - demet 2009-10-06 19:26:48 (83 views)
- Can't buy it separately ... it's part of the wiring harness ... - samspade 2009-10-05 11:20:14 (72 views)
  - And the harness is... no longer available. Drat. - seaside 2009-10-05 23:26:42 (93 views)
- I have searched completely through Sect. 41, 51, and 61 of the ETK with no luck. - Roy In GA 2009-10-04 22:32:04 (51 views)
  - Re: I have searched completely through Sect. 41, 51, and 61 of the ETK with no luck. - seaside 2009-10-04 22:48:03 (59 views)
    - I think sam is right. Your P/N is correct though. I remembered that I had an. - Roy In GA 2009-10-06 00:42:38 (79 views)
      - Check the 031 and 035 P/Ns with Crown BMW in NC. They list them. (nt) - Roy In GA 2009-10-06 01:01:16 (55 views)

well it happend... the trans finnally took a shit... (pic) - dantheman733i 2009-09-25 00:30:53 (220 views)
- Well I love the Red Leather. (nt) - samsonevickis 2009-09-25 03:05:49 (82 views)
- Re: well it happend... the trans finnally took a shit... - limeyexpat 2009-09-25 02:50:13 (109 views)
  - Re: well it happend... the trans finnally took a shit... - dantheman733i 2009-09-25 15:01:03 (113 views)
    - I'm no expert, but I think you need the 733i clutch, because - Vern 2009-09-26 12:02:57 (110 views)
      - yeah thats what i thought plus its a little cheaper. (pic) - dantheman733i 2009-09-27 00:01:47 (140 views)
        
        in need of some help.. - dantheman733i 2009-10-05 16:22:31 (69 views)

Electrical issues - budman420 2009-10-04 21:16:47 (100 views)
- Re: Electrical issues - Hitmanx 2009-10-05 10:33:41 (79 views)
- Test with an ammeter and pull each fuse until you find the right circuit. (nt) - Roy In GA 2009-10-04 22:46:00 (76 views)
  - Re: Test with an ammeter and pull each fuse until you find the right circuit. - budman420 2009-10-05 00:36:12 (76 views)
    - Did you look here? (url) - Roy In GA 2009-10-05 12:39:04 (73 views)
  - Re: Test with an ammeter and pull each fuse until you find the right circuit. - budman420 2009-10-05 00:31:45 (63 views)

Power Steering Pump Rebuild (pic) - limeyexpat 2009-10-02 17:25:21 (199 views)
- Re: Power Steering Pump Rebuild - Hitmanx 2009-10-02 19:04:20 (74 views)
  - Re: Power Steering Pump Rebuild - limeyexpat 2009-10-02 23:05:48 (100 views)
    - Re: Power Steering Pump Rebuild - seaside 2009-10-04 22:50:15 (70 views)
      - Re: Power Steering Pump Rebuild - limeyexpat 2009-10-05 00:22:15 (62 views)

E32 starter and studs? - Hitmanx 2009-10-04 19:35:09 (80 views)
- The ETK says the normal mount is with 2 10mm bolts, are you changing to 10mm - Roy In GA 2009-10-04 20:29:51 (96 views)
  - Re: The ETK says the normal mount is with 2 10mm bolts, are you changing to 10mm - Hitmanx 2009-10-04 20:41:01 (67 views)
    - m10 X 35 is good.... - sfdon 2009-10-04 21:52:25 (53 views)

Location of the transmission computer - clemsoncpa 2009-10-03 16:40:56 (90 views)
- Re: Location of the transmission computer - Hitmanx 2009-10-04 20:56:17 (79 views)
- Is it not in the ETM diagrams on e38.org/e23? (nt) - Roy In GA 2009-10-04 20:22:18 (83 views)

Relays for the ECE cars/745i? Qs - Hitmanx 2009-10-04 20:33:07 (62 views)

Fuel Tank Cleaning - Hitmanx 2009-10-03 16:19:48 (82 views)

Anyone have tan front headrests?? - 06impreza 2009-09-29 03:08:13 (72 views)
- There's about 8 different shades of tan from e23-32, - dr750 2009-10-02 14:06:44 (66 views)
  - Re: There's about 8 different shades of tan from e23-32, - 06impreza 2009-10-02 16:51:24 (88 views)

Need another instrument cluster. - BigBruce 2009-09-29 08:19:37 (75 views)
- What's a good price? - dr750 2009-10-02 13:57:34 (58 views)

just wondering what my car is worth to you guys - elariobordoni 2009-10-01 20:46:20 (140 views)
- Re: just wondering what my car is worth to you guys - Hitmanx 2009-10-02 11:55:03 (82 views)
- I'm sorry but a 735i with rust that needs bondo - sfdon 2009-10-02 00:11:51 (109 views)
  - i should have given a better description - elariobordoni 2009-10-02 00:19:57 (79 views)
- How did you 'patch' it up? That will determine what it's worth. (pic) - demet 2009-10-01 21:13:54 (125 views)
  - Why are these cars so cheap? - peeeot 2009-10-02 01:13:17 (84 views)
    - Complexity is part of it, the HVAC on these cars is known to - kff 2009-10-02 03:06:26 (99 views)
      - I can appreciate the maintenance cost point. - peeeot 2009-10-02 11:01:32 (81 views)
  - im not looking to sell, yet at least - elariobordoni 2009-10-01 21:19:24 (87 views)
    - Re: im not looking to sell, yet at least - limeyexpat 2009-10-02 13:34:39 (54 views)

1982 733i Gas Tank - raf73698324 2009-09-28 19:46:12 (113 views)
- Re: 1982 733i Gas Tank - hartac54 2009-09-29 21:54:33 (107 views)
  - Re: 1982 733i Gas Tank - raf73698324 2009-10-01 20:53:08 (56 views)
  - Re: 1982 733i Gas Tank - raf73698324 2009-10-01 20:52:25 (81 views)
- Where are you located? (nt) - demet 2009-09-28 20:11:24 (104 views)
  - Re: Where are you located? - raf73698324 2009-09-28 20:47:18 (77 views)
  - I have a 100L tank from my 745 in CT. (nt) - demet 2009-09-28 20:16:01 (85 views)
    - Re: I have a 100L tank from my 745 in CT. - raf73698324 2009-09-28 20:48:15 (66 views)
      - Anyone know if a 745 tank fits the 733. - demet 2009-09-29 13:30:38 (124 views)

odo dead - mofinco 2009-09-27 00:26:19 (96 views)
- Www.odometergears.com - 06impreza 2009-09-27 03:07:58 (97 views)
- bav auto and Palo Alto Speedo have them - sfdon 2009-09-27 01:27:22 (119 views)
  - Which 'bav auto'? - mofinco 2009-09-27 15:56:56 (80 views)
  - So it IS the gears... - mofinco 2009-09-27 13:02:46 (80 views)
    - Re: So it IS the gears... - 06impreza 2009-09-27 20:23:44 (96 views)
      - Is your car a Euro-spec car? - mofinco 2009-09-27 22:11:45 (89 views)
        
        Mine is us spec.. - 06impreza 2009-09-27 23:06:12 (68 views)
        
        Check that... - mofinco 2009-09-28 18:27:17 (67 views)
        
        You need to take your speedo out and count teeth.. Varies from car to car (nt) - 06impreza 2009-09-29 00:46:14 (80 views)
        
        LOL! I eventually figured that out... - mofinco 2009-10-01 01:14:13 (57 views)
        
        You need to (nt) - 06impreza 2009-09-29 00:45:47 (62 views)
        
        That helps! Thanks! (nt) - mofinco 2009-09-28 00:46:39 (72 views)

Cold idle and temperature switches. (pic) - peeeot 2009-09-28 23:42:11 (190 views)
- You're 735 doesn't have it. - demet 2009-09-29 08:58:36 (101 views)
  - Very good! What about the cold idle speed? - peeeot 2009-09-29 22:26:47 (85 views)
    - Yes (nt) - Area52 2009-09-29 23:37:08 (78 views)
      - okay! No worries then. (nt) - peeeot 2009-09-30 11:10:17 (89 views)
      - Re: Yes - peeeot 2009-09-30 11:09:48 (77 views)
- Re: Cold idle and temperature switches. - limeyexpat 2009-09-29 08:17:59 (110 views)

Thermostat and Block Drain Qs - peeeot 2009-09-23 17:26:41 (121 views)
- Well, I tried to find an old post with the block drain pics (pic) (url) - Vern 2009-09-25 13:58:42 (145 views)
  - Which thermostat is correct? (pic) - peeeot 2009-09-27 17:48:10 (143 views)
    - Since you have the 'A' housing ,you need (pic) - Vern 2009-09-28 16:39:37 (106 views)
      - Oh, not the response I was expecting. - peeeot 2009-09-28 19:46:19 (92 views)
        
        I think I get it now. (pic) - peeeot 2009-09-28 23:36:57 (113 views)
        
        You are exactly right... - Vern 2009-09-29 12:44:44 (79 views)
        
        RESOLUTION! - peeeot 2009-09-29 22:24:35 (85 views)
  - Re: Well, I tried to find an old post with the block drain pics - peeeot 2009-09-26 14:20:05 (100 views)
    - On the M30, the block drain is under the exhaust - kff 2009-09-26 15:28:20 (101 views)
      - Re: On the M30, the block drain is under the exhaust - peeeot 2009-09-28 19:42:23 (75 views)
- Re: Thermostat and Block Drain Qs (pic) - limeyexpat 2009-09-24 00:01:43 (167 views)
  - How come your engine is leaning over? Is it broke? (nt) - demet 2009-09-24 20:47:12 (91 views)
    - Re: How come your engine is leaning over? Is it broke? - limeyexpat 2009-09-24 20:57:48 (118 views)
      - Based on that response, I did, so thanks for that. - demet 2009-09-24 21:01:02 (101 views)
        
        Re: Based on that response, I did, so thanks for that. - limeyexpat 2009-09-25 02:48:02 (88 views)
        
        Yeah my 750 M73 has 2. (nt) - Roy In GA 2009-09-26 01:21:18 (73 views)
- 176°F is the stock 80 degree C thermostat. - kff 2009-09-23 21:07:04 (110 views)

Anyone need a wiper arm with air foil?? - 06impreza 2009-09-27 23:32:47 (91 views)
- Sold! (nt) - 06impreza 2009-09-29 20:44:54 (123 views)
- How much are you asking for it? (nt) - mofinco 2009-09-28 00:47:19 (69 views)
  - $12 shipped?? (nt) - 06impreza 2009-09-28 16:52:28 (62 views)
    - If it's in good shape... - mofinco 2009-09-28 18:24:17 (76 views)
      - Well it's by no means mint - 06impreza 2009-09-28 20:26:02 (85 views)
        
        Slap a coat of Satin Black on that thing and it is brand new. - kff 2009-09-28 22:49:22 (58 views)
      - I'm not picky so if mofinco passes let me know. (nt) - demet 2009-09-28 20:15:20 (99 views)

e23 wont start - ycs3euk 2009-09-26 11:12:15 (113 views)
- WHICH orange warning light (nt) - sfdon 2009-09-27 01:29:01 (98 views)
  - Re: WHICH orange warning light - ycs3euk 2009-09-27 13:43:14 (87 views)
    - Re: WHICH orange warning light - limeyexpat 2009-09-27 14:07:10 (72 views)
- Re: e23 wont start - limeyexpat 2009-09-26 11:21:03 (105 views)

the Brake Bomb - Mad Eyes 2009-09-24 20:15:56 (120 views)
- Re: the Brake Bomb - Hitmanx 2009-09-26 08:33:05 (109 views)
- an easy way to remove the bomb... - johnhstein, 85-M6CSi, 85 745i 2009-09-25 12:24:06 (89 views)
- yes it's the round black thing at the end of the regulator. (pic) - demet 2009-09-24 20:58:16 (167 views)
  - Its a PITA to get out but - clemsoncpa 2009-09-25 01:29:47 (95 views)
    - Re: Its a PITA to get out but (url) - Mad Eyes 2009-09-25 08:55:06 (110 views)
      - I got a regulator and bomb in the Pull a Part yard last year and put the - Roy In GA 2009-09-26 01:25:01 (90 views)

Automatic circuit breaker switch - cwilson1 2009-09-24 09:05:08 (100 views)
- The switch above your knee is the window circuit breaker - kff 2009-09-24 11:49:36 (104 views)
  - Re: The switch above your knee is the window circuit breaker - cwilson1 2009-09-24 12:21:52 (88 views)
    - Re: The switch above your knee is the window circuit breaker (url) - kff 2009-09-24 17:27:49 (59 views)

Any interest in a 87 535 5 speed tranny? Before i post in the for sale section (nt) - goms187 2009-09-22 22:01:15 (132 views)
- Do you know what model? (nt) - demet 2009-09-24 00:04:23 (72 views)
  - The 87 535i has a 260/6 in it from the factory. Good tranny - kff 2009-09-24 11:45:49 (118 views)
  - Its the newer 260 getrag (nt) - goms187 2009-09-24 10:09:35 (61 views)

Anyone want a spare dash trim? - limeyexpat 2009-09-23 08:40:27 (94 views)

Bypassing S-E-123 Switch - clemsoncpa 2009-09-22 19:56:46 (101 views)
- It can be done without any adversity (to the car). - demet 2009-09-22 20:58:23 (108 views)
  - Alright I'm gonna trouble shoot this weekend - clemsoncpa 2009-09-23 01:00:04 (81 views)

Decals are in! Click sticky above to order! Thanks! (pic) - visionbmw7 2009-09-23 00:00:55 (136 views)

carpet and foam stuff underneath - elariobordoni 2009-09-17 20:10:00 (112 views)
- When I called Maximillian (5 years ago?), I just told them what - DavidC 2009-09-21 14:01:06 (89 views)
  - i took a different route on the foam stuff - elariobordoni 2009-09-22 20:10:30 (93 views)
- Here's a start...tried to post last night (url) - Vern 2009-09-18 15:42:22 (109 views)
  - Nice video walk around of your 745, Vern. I didn't realize that you got it - DavidC 2009-09-21 14:05:35 (106 views)
    - Thank you, David...I should have let you know I was - Vern 2009-09-21 15:39:21 (66 views)
- Elario, What color is your E23? (nt) - Vern 2009-09-18 00:33:05 (84 views)
  - Re: Elario, What color is your E23? - elariobordoni 2009-09-18 08:08:31 (99 views)
    - That sounds pretty cool, two tone (nt) - samsonevickis 2009-09-18 09:08:02 (90 views)

Are these classic symptoms of vac leaks? Heater wants to blow hot all the time - phathome 2009-09-19 15:05:27 (108 views)
- Because it gradually goes hot again, it does sounds like a vacuum problem. (pic) (url) - DavidC 2009-09-20 14:13:35 (152 views)
  - Many thanks David. Mark and I carried out some checks. - phathome 2009-09-21 03:34:03 (124 views)
- Two checks...use a hand vac pump at the heatr valve... - Vern 2009-09-19 15:40:42 (127 views)

Who here is using BMW Blue in their Coolant tanks? - samsonevickis 2009-09-19 17:49:46 (135 views)
- Re: Who here is using BMW Blue in their Coolant tanks? - Hitmanx 2009-09-20 20:09:20 (76 views)
- I am. The BMW coolant is almost the same price as Zerex. - DavidC 2009-09-20 14:08:14 (113 views)
  - Lucky you, maybe a KY thing. I get the Xerex at NAPA beats the dealer a lot. (nt) - Roy In GA 2009-09-20 19:56:10 (87 views)
- Re: Who here is using BMW Blue in their Coolant tanks? - clemsoncpa 2009-09-19 20:06:28 (96 views)
  - A lot of the e38 guys use Xerex G-05 as the blue is too expensive. (nt) - Roy In GA 2009-09-19 21:52:15 (85 views)
    - $15 for BMW Blue, $11 for equivalent- no Zerx G05 available in S Ca. (nt) - bmw635 2009-09-21 00:31:53 (65 views)

Speaking of interior... - thegreendragonfly 2009-09-18 15:08:16 (111 views)
- I;m guessing pergament based on the E28 color chart (url) - kff 2009-09-18 17:00:38 (103 views)
  - Here is the leather color chart from the same site (url) - kff 2009-09-18 17:18:02 (148 views)
- Start here...from Realoem... (url) - Vern 2009-09-18 15:56:28 (94 views)

A/C Compressor options - peeeot 2009-09-18 14:48:00 (102 views)

Vacuum pump interchangability - peeeot 2009-09-17 12:17:54 (96 views)
- Re: Vacuum pump interchangability - limeyexpat 2009-09-17 20:15:50 (74 views)
  - Jag uses the same pump as BMW...Saab has a different plug, but works (nt) - Vern 2009-09-18 00:04:27 (95 views)
- I have one from a 85 735 if you want to save the trip... - 06impreza 2009-09-17 15:20:55 (100 views)
  - oh really?? - peeeot 2009-09-17 19:36:04 (117 views)
    - Re: oh really?? - 06impreza 2009-09-17 19:51:14 (94 views)
      - Re: oh really?? - peeeot 2009-09-18 01:15:48 (94 views)
        
        Email sent (nt) - 06impreza 2009-09-18 01:30:53 (87 views)

Found a good deal for a 1985 745 turbo an I need some add'l insight. - bmw635 2009-09-16 22:31:40 (164 views)
- Anybody have an interest in this? Realistically, I may not get it but hate for - bmw635 2009-09-17 16:14:21 (105 views)
- Where is the car? - sfdon 2009-09-17 10:59:51 (93 views)
  - YGM (nt) - bmw635 2009-09-17 12:51:37 (85 views)
- Re: Found a good deal for a 1985 745 turbo an I need some add'l insight. - Hitmanx 2009-09-16 23:07:20 (116 views)
- I think Vern and sfdon are the CA experts. maybe you are near one of them. (nt) - Roy In GA 2009-09-16 23:02:12 (92 views)
  - Roy- YGM. (nt) - bmw635 2009-09-16 23:35:45 (118 views)
  - Yea, Spoke with Vern before- I'll PM'd him. Thanks Roy. (nt) - bmw635 2009-09-16 23:21:48 (99 views)

Low Startup Oil Pressure since Change - peeeot 2009-09-13 18:41:15 (129 views)
- Relax, my 733 does the same thing with a new oil pump and 20-50. - ejonesie22 2009-09-13 22:43:53 (100 views)
  - Forgive me, last thing I'll say... - peeeot 2009-09-17 12:11:48 (96 views)
  - What a relief! - peeeot 2009-09-14 00:52:22 (114 views)
- It's prolly just the difference in viscosity. Thicker oil - Vern 2009-09-13 21:53:48 (117 views)
  - I was hoping that was it. - peeeot 2009-09-14 00:55:38 (119 views)
    - Re: I was hoping that was it. - Hitmanx 2009-09-14 04:50:35 (78 views)

Vern- YGM. (nt) - bmw635 2009-09-16 23:35:08 (99 views)

fog light protectors - goms187 2009-09-16 11:36:14 (102 views)
- Laminx or Xpel have been mentioned (url) - kff 2009-09-16 12:59:04 (123 views)
  - I think another is called Stongard. (nt) - Roy In GA 2009-09-16 22:59:37 (87 views)
  - thanks keith (nt) - goms187 2009-09-16 20:59:57 (92 views)
  - i am going to order the headlight film - 06impreza 2009-09-16 19:16:44 (127 views)

Good way to get tranny sensors out?? - stevebu 2009-09-15 08:13:10 (117 views)
- Got em-PITA !! (pic) - stevebu 2009-09-15 16:44:34 (163 views)
  - By the way- - stevebu 2009-09-15 17:44:46 (77 views)
    - I coat mine with anti-seize si that does not happen (nt) - ((((BIGANT)))) 2009-09-16 22:25:55 (82 views)

Fix up 1985 735i or 1997 ford aspire? - sgstudioguitar 2009-09-12 21:14:47 (94 views)
- I still drag stuff from 'over there'... (url) - Vern 2009-09-13 23:55:31 (112 views)
  - HAHA! I'd rather push mine as well! (nt) - samsonevickis 2009-09-14 00:56:14 (85 views)
- Re: Fix up 1985 735i or 1997 ford aspire? - Area52 2009-09-12 21:54:14 (95 views)
  - Not even debate in my mind. - samsonevickis 2009-09-12 22:08:03 (102 views)
    - Re: Not even debate in my mind. - matthewt 2009-09-12 23:22:39 (97 views)

Part I've been trying to locate (url) - jrodriquez70 2009-09-11 22:49:40 (114 views)